Ejector Condenser

Ejector Condenser is a combination of Ejector which constantly ejects air to maintain a state of vacuum inside of Vacuum Steam Condenser, by using steam, and condenser which condensing and re-circulates the used steam.
If air infiltrates into Vacuum Steam Condenser for Steam Turbine, it wraps surface of tube and subsequently, the heat-transfer efficiency drops and vacuum state of Surface Condenser is released. Consequently, the efficiency of turbine falls down.
Therefore, Steam Ejector is used to eject air from Condenser, and Surface condenser is used to collect discharging steam accompanied with air, by using cooling water. For the reuse and efficiency, this condensate is mainly turned back to Surface Condenser through steam strap. Generally, Ejector Vacuum System is comprised of first stage Ejector and middle Surface Condenser, and second stage Ejector and final Surface Condenser. Since any rotating instrument is not included, it has advantage such as easy maintenance.

Necessity of Ejector system

The vacuum degree is decreased if the air is penetrated to vacuum surface condenser for turbine and result the decrease of power of turbine. Therefore steam driving ejector is necessary in order to remove air in vacuum surface condenser and ejector condenser is necessary in order to condense the driving steam. Usually ejector vacuum system is consisted of 1st ejector, inter condenser, 2nd ejector and after condenser. Comparing to vacuum pump, maintenance is not
needed because there is not rotation machinery using electricity.

http://www.dh.co.kr/ejector-condenser/

이 블로그의 인기 게시물

PCHE

[PCHE(Printedcircuitheatexchanger)] PCHE(Printed Circuit Heat Exchanger)는 고온고압의 진공 환경 조건에서 모재와 모재 사이의 표면에서 발생하는 계면 확산 현상을 이용하여 모재와 모재를 접합하는 제품입니다. 열교환 형태는 Plate Type과 유사하나, Plate-Plate 간의 구조적 결합이 모재의 기계적 특성을 유지하는 장점으로 고온 및 초저온, 고압 환경에서 사용 가능한 특성이 있습니다. Compact한 특징의 열교환기로 선박에서는 주로 LNG 운반선의 BOG 재액화장비(초저온), 고압 기화기, Compressor Cooler 등으로 사용하고 있습니다. 육상용으로 수소연료전지의 폐열회수, 개질, SCO2 발전, 수소충전소 등에 사용하고 있습니다. 특히 ㈜동화엔텍은 수소충전소의 H2 Pre Cooler(700bar)를 최고품질로 공급하고 있습니다. #동화엔텍 #DongHwaEntec #PCHE #Printedcircuitheatexchanger

자세한 내용 보기

Fresh Water Generator Fresh Water Generator is used to...

Fresh Water Generator Fresh Water Generator is used to desalinate seawater for the ships. There are two types fresh water generator, R/O type and Low-pressure vapor type. Low-pressure vapor type is most widely used in commercial ships because it utilizes wasted engine jacket water or steam while sailing. The engine jacket water and steam can be utilized as a heat-source, and Shell & Tube type and Plate type are available. The seawater is heated by various heat-sources under the vacuum state, and then vaporized accordingly. The vaporized seawater is desalinated in separate filtering unit before condensed, and then fresh water is produced. Meanwhile, a salinity of produced fresh water shall remain at 0~10 ppm . Fresh Water Generator is comprised of vaporizer, condenser, demister, salinometer, distillate pump, ejector and steam injector. Multi-stage Fresh Water Generator can achieve high efficiency when large amount of fresh water is required with small amount of calories due to

자세한 내용 보기

[(주)동화엔텍]감사의 기적_감사나눔운동을 시작하며

자세한 내용 보기

DongHwa Entec

이 블로그 검색